I'm currently looking at a truck and trailer for work requiring a 53ft dry van. What type of axle ratio and gearing would you suggest? Also I plan to predominately run in the southeast, midwest, and Texas. I'd say the majority of the freight I plan on hauling would be above 40,000lbs. Some examples of what I plan to haul are bottled water and soda, building materials and insulation, auto parts, lawn care products, etc. What type of horsepower and torque should I be looking for in an engine for this type of work? I know that some shippers require a trailer 10 years or newer, but I don't think most places I plan on going have this rule, would you still suggest getting a trailer within this age for reliability or will I be good with an older trailer? I've got several questions, but essentially I just want advice on what you all believe is the best set up for hauling a 53ft dry van.
What is the ideal set up for hauling a 53ft dry van?
Discussion in 'Questions From New Drivers' started by F1Trucker, Apr 11, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Get you a spread axle trailer.
-
The only time I've run into that "10yr" rule is at paper mills, picking up heavy roll stock.
Not to say others don't have it, but that's where I encounter it.
The reason for it is they have to have some kind of cut off.
Some ragged heaps out here.
That roll stock is heavy. You might get 6 rolls, spaced out. That's stress on an unkempt old trailer.
THEY'LL SNAP IN HALF. -
-
bryan21384 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.