I got to run one of those, or a D31? a few years ago. I'm a Cat guy, but it was a nice smaller tractor.
Cost of shipping a D8 dozer?
Discussion in 'Heavy Haul Trucking Forum' started by bertita1986, Oct 31, 2018.
Page 4 of 6
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
4mer trucker, Oxbow and cke Thank this.
-
4mer trucker and cke Thank this.
-
Depending on the dozer it can make a 1 to 2 foot difference in width. Its almost 2 feet narrower when hauling a 9.
-
cke, 4mer trucker and truckdad Thank this.
-
cke, 4mer trucker and truckdad Thank this.
-
cke, 4mer trucker, Ruthless and 1 other person Thank this.
-
cke, 4mer trucker and Oxbow Thank this.
-
I have not seen a power angle blade on them. Angle it before loading onto the bed.
Also never seen a 10 or 11 hauled whole. Maybe some are moved still together, but the only 10 or 11 i moved were in pieces. Some people have those 16 axle setups and maybe not in the steep mountain terrain i am in, so possibly they can haul an 11 with blade and C frame attached. If i ever do see that myself hopefully i can stop and take a good look at their set up. I bet even on a good paved road pulling that load, just a 10% grade would feel more like you are trying to drive up Mt. Everest.Feedman, cke, Ruthless and 1 other person Thank this. -
There's a 10 with outside dozer, and an 11 with no dozer parked next to the railroad(east of the embankment) south of 159th street in Harvey, the dealer there moved out but must still have enough property to park a few hard to move machines.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 6