Hello guys,
anyone can advice if it’s possible to install double-stacked ramp hangers on a drop deck with knee braces?
Or do I have to go with single layer setup?
I don’t think I would have enough space to hang them single layer on one of the sides because of the dunnage rack.
What is the disadvantage and what to look for?
Ramps would be from Landsport and 21” wide.
Trailer is a Wilson.
Thank you.
Loading Ramp hangers style
Discussion in 'Flatbed Trucking Forum' started by Jacoooooooo, Aug 25, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
It can be done. This trailer is a Transcraft. 
Attached Files:
singlescrewshaker, cke, Lepton1 and 1 other person Thank this. -
-
Do you know how wide are your ramps? And how tall is the whole setup? Also the clearance from the ground? Sorry for too many questions. -
Those are mine , i put 4x4 on lower ramp
Attached Files:
singlescrewshaker Thanks this. -
-
-
I talked to my buddy and he never reinstalled knee brace ... All good for over a year , i removed 1 or 2 - no issue so far , depending whos driving and what loads you getting , those ibeams should withstand most of the loads i guess .Jacoooooooo Thanks this. -
Thats what you need
Attached Files:
singlescrewshaker and Jacoooooooo Thank this. -
-
Thank you. -
Hdramps
Google them
https://www.hdramps.com/general-ramp-info/Lepton1 Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2