Where is everyone #5

Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.

  1. Hurricane69

    Hurricane69 Road Train Member

    4,421
    59,740
    Sep 10, 2008
    Iowa
    0
    Hollar if a need a extra set of eyes.... I'll drive down.

    I walked the fields for two days when we lost Breez....... She finally showed up at the neighbors after we had already got sis....

    Hopefully he just found him a new sweetie down the road....

    Take care!!!!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Rontonio

    Rontonio Road Train Member

    6,064
    43,608
    Aug 9, 2009
    0
    @wore out

    Thinking positive thoughts for both of you - I would be in a bad way
     
  4. Hurricane69

    Hurricane69 Road Train Member

    4,421
    59,740
    Sep 10, 2008
    Iowa
    0
    Don't have the core. I took pictures of every fitting on the head....not the bearings.

    Don't matter.....they ain't right but they gonna be
     
  5. tony97905

    tony97905 Road Train Member

    1,023
    12,241
    Feb 28, 2015
    Land of Ahhhhhs
    0
    What part are you trying to track down?
     
  6. tony97905

    tony97905 Road Train Member

    1,023
    12,241
    Feb 28, 2015
    Land of Ahhhhhs
    0
    I didn't read ahead....sucks for sure. I recall a reman CAT head missing one of the cup plugs under the intake....it's always something.
     
  7. Hurricane69

    Hurricane69 Road Train Member

    4,421
    59,740
    Sep 10, 2008
    Iowa
    0
    Grillin' romaine hearts to go with the fish....what a pain...

    1575599431651-1738789203.jpg
     
  8. pushbroom

    pushbroom Road Train Member

    1,769
    7,204
    Sep 1, 2012
    0
    Got some pre-production 389 headlights to try from speaker. Plug and play, fits in the factory housing. Low beam seems to have double or triple the coverage of the factory lights. No light out warnings or flickering either. Only thing these are missing are the heated lens, which is still in the testing phase. Waiting on driver feedback then they will be ready for production in another couple months. They seem to be a cut above the other drop in replacements we have used in the past. 1hr install time. Single screw aiming like the factory ones.
    Center light is low/high. Wavy one next to the grill turns amber when signalling.
    20191205_111918.jpg 20191205_111946.jpg 20191205_073015.jpg
     
  9. Tug Toy

    Tug Toy Road Train Member

    6,781
    70,621
    Jul 4, 2015
    Corn field
    0
    The fan pedestal. It started leaking air the other day. I just unplugged it and running it with the fan on. Who would of though it would be hard to find?
     
  10. old iron

    old iron Road Train Member

    1,125
    19,698
    Feb 19, 2011
    Northern Wi
    0
    J.W. Speaker 8800 Evolution 2
    My parts guy has sold a lot of them with good results. Made in Wisconsin with a 3 year warranty on the heated ones. (5yr on unheated)
    They are bright for sure! I put one side on and tried them out in a dark pole shed. I couldn't even tell the glazed over factory lights was on.
    But looking head on at them I don't think it's too bad on oncoming traffic. At least they're aimed right unlike most of the guys blinding everyone around them...
    My biggest fear is hitting a moose at road speed. I come REAL close more times than I can count. I wanted to put a set of aircraft landing lights on the moose bumper but am afraid they would rattle apart in no time.
     
  11. Hurricane69

    Hurricane69 Road Train Member

    4,421
    59,740
    Sep 10, 2008
    Iowa
    0
    Might try to snag a used one to get you by till they figure it out....just a thought
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.