Hey i changed my fuel / water separator filter and i forgot to put the top o-ring back on top of the filter. I thought my injectors were going bad because the truck took a long time to start up and would stall only under loads. Now that i replaced the o-ring the hard start has completely went away but it still stalls under loads sometimes when going up a small incline.
Do you guys think i have air in my fuel lines from forgetting to put the o-ring back on its circled in the picture. (No check engine lights)
D13 forgot to put rubber o-ring fuel water separator
Discussion in 'Volvo Forum' started by Imani100, Feb 13, 2020.
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Did you clean the surface area on both o rings?
Sounds like your still sucking air and loosing prime.Imani100 Thanks this. -
-
It may have been the big o/ring was not seated in the slot and was causing the trouble?
Imani100 Thanks this. -
-
Can try re seating the plastic ring. It has to be fairly tight. You should not see bubbles in the bowl and it should fill with fuel to the bottom of a new filter at idle.EverLuc, Chubby Fly, baha and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.