Can we talk about the Detroit Bull Gear?

I did over 1.9 miles

 

Here is my bull gear. The valve lash was still in spec and the bull gear had almost no play. It's not something that I would've caught just by taking an accessory drive off. This came off a 97 FLD with 1.5 million. Not sure if it was ever replaced or not.



On a side note, in 2003 Detroit went to a compact geartrain and it's a lot beefier. That's what both a Detroit mechanic and the guy who I bought my remanufactured bull gear from told me. Apparently those don't have a taper bearing anymore and don't fail. I will confirm this when I take my 2003 apart to fix an oil leak behind the front cover.

 

My 06 Columbia detriot bull gear went bad. And it was smoking like a freight train every morning start up for about 3 to 5 min.

 

Good to know. What went bad on it, the bearings? And how was it causing it to smoke?

 

I had to replace bearing and all. Guy said it jumped timing. New bull gear solved everything.

 

Did it jump from the bearing being so loose or did it break teeth?

 

Could you email me the service manual?

 

Dose the same bull gear with the same part number Fit both 11.1 and 12.7

 

You have to take the whole front cover off

 

Is it the same bull gear on both 11.1 /12.7