Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Lube for binders

Discussion in 'Flatbed Trucking Forum' started by D.Tibbitt, Mar 15, 2020.

Page 1 of 6
  1. Mar 15, 2020 #1
    D.Tibbitt

    D.Tibbitt Road Train Member

    19,660
    130,560
    Apr 26, 2013
    Gettin' down westbound
    0
    Wondering what u guys use for the best lube for ratchet binders. I have litteraly tried everything but run into the same problem each time. They either dry out or get gunked up or both.

    The best i have found is just basic liquid wrench or any pentrating oil.

    I have tried so much different kinds of grease but they all get gunked up, especially running open headache rack.

    Had a guy tell me to use the lucas hub oil and that turned out to be worse than the grease, welded my binders shut, had to get a hammer to break them open.

    The only problem with penetrating oil is that it dries out after u have them on freight, and doesnt really protect it against road salt or other elements.

    My next experiment was gonna be with some motor oil .

    What do u guys use or had luck with ?
     
    Last edited: Mar 15, 2020
    D.Tibbitt, Mar 15, 2020
    D.Tibbitt, Mar 15, 2020
    #1
    OLDSKOOLERnWV, Shawn2130, JonJon78 and 4 others Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 15, 2020 #2
    Hulld

    Hulld Road Train Member

    2,882
    6,561
    Oct 19, 2015
    Upstate NY
    0
    I use Fluid film on my ratchets for my car hauler.
    Stays a long time and doesn’t harden.
    It comes in an aerosol can and you just spray it on.
     
    Hulld, Mar 15, 2020
    Hulld, Mar 15, 2020
    #2
    DL550CAT, Shawn2130, singlescrewshaker and 2 others Thank this.
  4. Mar 15, 2020 #3
    MM71

    MM71 Heavy Load Member

    753
    974
    Jun 28, 2008
    AZ
    0
    Gear oil ...

    If you want to spend extra money chain wax (motorcycle chain lube) or as mentioned Fluid Film ...
     
    MM71, Mar 15, 2020
    MM71, Mar 15, 2020
    #3
    FoolsErrand, Shawn2130, singlescrewshaker and 3 others Thank this.
  5. Mar 15, 2020 #4
    skellr

    skellr Road Train Member

    8,737
    12,179
    Jul 17, 2011
    The Village, Portmeirion
    0
    I use Lucas 5th wheel/slider lube in the summer and 90w gear oil in the winter. 90w would probably work just as well if you used it every other load to flush out the dirt. I just like the bottle shapes for easy application.

    I always wanted to try CV axle grease but never got around to it...
     
    skellr, Mar 15, 2020
    skellr, Mar 15, 2020
    #4
    singlescrewshaker, cke and D.Tibbitt Thank this.
  7. Mar 15, 2020 #5
    Razorwyr

    Razorwyr Road Train Member

    2,284
    2,824
    Jul 27, 2010
    Meridian, Mississippi
    0
    PB Blaster after every use or a little Motorkote, but PB Blaster is waaaaay cheaper
     
    Razorwyr, Mar 15, 2020
    Razorwyr, Mar 15, 2020
    #5
    skellr, singlescrewshaker and D.Tibbitt Thank this.
  8. Mar 15, 2020 #6
    Deere hunter

    Deere hunter Road Train Member

    1,253
    3,804
    Aug 5, 2017
    Shallowater Texas
    0
    Two stroke oil not bad but I use 90 weight once a month than wd40 in between keeps them from guming up!!!
     
    Deere hunter, Mar 15, 2020
    Deere hunter, Mar 15, 2020
    #6
    singlescrewshaker and D.Tibbitt Thank this.
  9. Mar 15, 2020 #7
    Deere hunter

    Deere hunter Road Train Member

    1,253
    3,804
    Aug 5, 2017
    Shallowater Texas
    0
    White lithium grease is also good!
     
    Deere hunter, Mar 15, 2020
    Deere hunter, Mar 15, 2020
    #7
    ChevyCam, misterG, BUMBACLADWAR and 4 others Thank this.
  10. Mar 15, 2020 #8
    D.Tibbitt

    D.Tibbitt Road Train Member

    19,660
    130,560
    Apr 26, 2013
    Gettin' down westbound
    0
    I ne ver had any luck with those . White lithium gummed up on me after awhile. Not as bad as the grease but after a couple applications i didnt use it anymore. Think im gonna try the gear oil or some heavy weight oil like u said and see how she holds up !!
     
    D.Tibbitt, Mar 15, 2020
    D.Tibbitt, Mar 15, 2020
    #8
    singlescrewshaker and Deere hunter Thank this.
  11. Mar 15, 2020 #9
    Dave1837

    Dave1837 Road Train Member

    1,323
    4,127
    Nov 16, 2019
    Pennsylvania
    0
    I used WD40 to get them oiled up, then I sprayed them with silicone spray for work boots. With those 2 combined it repelled the water & road junk really well for about 2 weeks, then I had to do it again. Not a perfect solution but it worked
     
    Dave1837, Mar 15, 2020
    Dave1837, Mar 15, 2020
    #9
    singlescrewshaker, D.Tibbitt and Deere hunter Thank this.
  12. Mar 15, 2020 #10
    solitary_con

    solitary_con Light Load Member

    147
    137
    Mar 2, 2007
    Cook County, IL
    0
    That's the only thing I found that works.
     
    solitary_con, Mar 15, 2020
    solitary_con, Mar 15, 2020
    #10
    singlescrewshaker, Deere hunter and D.Tibbitt Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 6