Sprinter van on cx-6 cx-7

You should be able to, but if I remember right you end up about 14 foot tall

 

I had a midroof on my cx7 (wrong model #, mine is a mst-7 I believe) up at the front of trailer and I was 14-2. High top on the backend no problem though.

 

Not my rig and not a high rail, but is this anything like what you are planning to haul?

 

Just looking at the safety posts on the tractor I thought this would be a low load. Guess I was wrong.

 

Looks great but this is a low side. Those look like mid-roofs. The top table on this trailer will come down significantly lower than my 7 car. Im just assuming he has a trailer like mine.

 

That’s what I was thinking but wasn’t sure. I have never measured my top deck compared to a quick loader but it looks very close when bottomed out.

 

@WiseGuy860 has hauled them on a high rail. He may be able to give his input.

 

Just in case he doesn’t reply, here is his old post. He is among a few of the best high rail operators on this forum, due to some of the loads he had posted on a high rail.