Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2010 International Prostar Dump Valve Blinking

Discussion in 'International Forum' started by Smellfunny, Nov 11, 2015.

Page 5 of 5
  1. Apr 23, 2020 #41
    Albert85

    Albert85 Bobtail Member

    3
    0
    Apr 23, 2020
    0
    When you had this problem did you replace all solenoids I replaced two and now I'm only filling when in dump position but as soon as I take off it blinks and deflates
     
    Albert85, Apr 23, 2020
    Albert85, Apr 23, 2020
    #41
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 23, 2020 #41
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,780
    1,725
    Jun 14, 2009
    romulus,mi
    0
    Are you sure that you didn't mix solenoids up?
     
    QUALITYTRUCK, Apr 23, 2020
    QUALITYTRUCK, Apr 23, 2020
    #41
  4. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  5. Apr 23, 2020 #42
    Albert85

    Albert85 Bobtail Member

    3
    0
    Apr 23, 2020
    0
    I replaced 711 712 and 713 today was told if looking at it that it ran left to right in that order from part number but still loosing air when ignition off from leveling valve which is new
     
    Albert85, Apr 23, 2020
    Albert85, Apr 23, 2020
    #42
  6. Apr 23, 2020 #43
    Albert85

    Albert85 Bobtail Member

    3
    0
    Apr 23, 2020
    0
    Do you know if the order I replaced them in is correct
     
    Albert85, Apr 23, 2020
    Albert85, Apr 23, 2020
    #43
  7. Apr 24, 2021 #44
    mortt1972

    mortt1972 Bobtail Member

    1
    0
    Mar 13, 2020
    0
    Got a question for you heavyd. I got a 2016 Lonestar and got the dump switch flashing. Got the following code, spn-1756 fmi 5. I replaced both solenoids but still have the flashing like and same code. Airbags stay inflated but won’t dump.
     
    mortt1972, Apr 24, 2021
    mortt1972, Apr 24, 2021
    #44
  9. Apr 24, 2021 #45
    Heavyd

    Heavyd Road Train Member

    7,625
    6,027
    Feb 4, 2009
    0
    You have a wiring problem between the body controller and solenoid pack. Some times the board the solenoids plug into become corroded internally and are bad. At the connector, one pin is main ground, (white) and the other four are for each solenoid. Normal running, the A solenoid is energized, B is de-energized. Dump the B solenoid is energized and A is de-energized.
     
    Heavyd, Apr 24, 2021
    Heavyd, Apr 24, 2021
    #45
    Noobtr Thanks this.
  10. Dec 19, 2023 #46
    Smellfunny

    Smellfunny Road Train Member

    1,395
    936
    Jan 28, 2012
    South Carolina
    0
    @Heavyd Thanks again for this information. I had another truck come in and was able to use this to help me.
     
    Smellfunny, Dec 19, 2023
    Smellfunny, Dec 19, 2023
    #46
    Heavyd Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 5 of 5