Quality of Delco Remy 39mt starters are bad. I keep changing them on DD15s. The latest pn 8200424 worked only 1.5 years. Did anybody have teared it down to see what is the problem inside? Anybody used Denso poweredge starters on DD15 ? If yes are they good?
Quality of Delco 39mt starters
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Motto, Jun 1, 2020.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Red is small solenoid. Blue is big one. -
-
I’ve installed 2 of those. One on the freightliner, works good so far.
Installed one on the ford, got maybe 3 months, dead. changed the little solenoid, nothing.
Switched back to using rebuilt slow turning starters of the past.
Took the 3 month starter in to be checked. The big solenoid was burned. Not sure why. -
I just replaced mine this weekend.
The starter motor housing was coming loose from the mounting flange. Those two really long thin bolts that run along the outside of the casing weren't tight enough.Motto Thanks this. -
Were the starters you got rebuilt or brand new? The ones that are rebuilt are sent overseas and only the parts that failed are replaced, the sol. that are put on are known to be junk.
-
-
btw freightliner has mitsubishi starters. They are little expensive.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3