Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Belt Tension

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by johnnyboyloco2500, Jun 9, 2020.

  1. Jun 9, 2020 #1
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    2013 pete 386, cummis isx. A/c. Stop blowing cold.pulled over and belt was off. Tension r was sees up
    So question is, to get the bolt off with a allen head socket. Should i heated up a little or just spray good with liquid wench?
    Thanks
     
    johnnyboyloco2500, Jun 9, 2020
    johnnyboyloco2500, Jun 9, 2020
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 9, 2020 #2
    Goodysnap

    Goodysnap Road Train Member

    3,502
    8,384
    Jul 12, 2017
    0
    Very common for siezing. I have had to replace the whole accesory bracket many times. Aluminium vs steel. Threads are in the bracket.
     
    Goodysnap, Jun 9, 2020
    Goodysnap, Jun 9, 2020
    #2
    Dino soar, PE_T, Rideandrepair and 1 other person Thank this.
  4. Jun 9, 2020 #3
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    So the treads on tension bottom that bolts to bracket. Reluar counter clock to get bolt out of bracket ? How much were brackets ?
    Why couldn’t you drill all the way thru and put a thru bolt?
    Thanks
     
    johnnyboyloco2500, Jun 9, 2020
    johnnyboyloco2500, Jun 9, 2020
    #3
  5. Jun 9, 2020 #4
    Goodysnap

    Goodysnap Road Train Member

    3,502
    8,384
    Jul 12, 2017
    0
    You may be able to save it with a heli-coil or a through bolt and nut. There is no access to tighten from the back side when its on the truck. I don't remember the bracket being terrible. Maybe a 3-400?

    The bolt is standard RH thread.
     
    Goodysnap, Jun 9, 2020
    Goodysnap, Jun 9, 2020
    #4
    pushbroom and BoxCarKidd Thank this.
  7. Jun 9, 2020 #5
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    Thank you for all you info . Big a big help.
     
    johnnyboyloco2500, Jun 9, 2020
    johnnyboyloco2500, Jun 9, 2020
    #5
    Goodysnap Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.