Oh well, I'm down D16 spun a bearing

Discussion in 'Volvo Forum' started by sbreeden, Jun 18, 2020.

  1. sbreeden

    sbreeden Light Load Member

    73
    55
    Dec 15, 2016
    0
    Lost my engine due to a spun bearing, ate into the block. At least it lasted to deliver my cargo and get me home. Dealer opening the bottom and saw all the metal in the pan, removed the bearing and was dead at #4 cylinder, to far gone to rebuild. The crankshaft was damaged also. Engine lasted 1.3 million miles with no overhaul.

    A reman engine at a tune of $47k, found a full dress used one with so called 360k on the clock for $12k, with 30 day warranty, should be at the dealer on Tuesday, they charging $9k to install. Before installed they going to check the upper and lower and pressure test it. Hopefully I can get 1 million plus out of this one.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Socal Xpress

    Socal Xpress Road Train Member

    1,855
    1,957
    Dec 6, 2014
    Los Angeles, Ca
    0
    Any warning before she spun? Do you monitor the oil pressure?
     
  4. Rubber duck kw

    Rubber duck kw Road Train Member

    6,082
    17,653
    Dec 9, 2017
    0
    How far did you drive it with a spun bearing? I only ask because I'm guessing it made a heck of a racket and shook.
     
    Coffey and Rideandrepair Thank this.
  5. tommymonza

    tommymonza Road Train Member

    4,519
    12,844
    Sep 10, 2013
    S.W. Florida
    0
    9 thousand dollars to swap out dressed motors.

    That Sounds perfectly Reasonable .
     
    Rideandrepair, sealevel and Ffx95 Thank this.
  6. Frontman

    Frontman Light Load Member

    166
    151
    Apr 4, 2012
    0
    What engine?
     
    Rideandrepair Thanks this.
  7. Ffx95

    Ffx95 Road Train Member

    1,358
    2,607
    May 18, 2017
    0
    9 grand to swap motors? WTH
     
    Rideandrepair Thanks this.
  8. MACK E-6

    MACK E-6 Moderator Staff Member

    45,836
    200,275
    Sep 19, 2005
    Baltimore, MD
    0
    Volvo D16...
     
    Rideandrepair, Doealex and Frontman Thank this.
  9. Frontman

    Frontman Light Load Member

    166
    151
    Apr 4, 2012
    0
    Dang! Don't know how I missed that.
     
    Rideandrepair Thanks this.
  10. bad-luck

    bad-luck Road Train Member

    3,017
    5,396
    Nov 16, 2013
    Baltimore, Maryland
    0
    That sucks, sorry to hear that. Did you ever have the rods and mains done? Once you spin a bearing, the block is done. I have mine done at 500k
     
    Rideandrepair Thanks this.
  11. bad-luck

    bad-luck Road Train Member

    3,017
    5,396
    Nov 16, 2013
    Baltimore, Maryland
    0
    Fyi a bearing spins when the bearings are worn out, and haven't been changed. Doing rods and mains prevents this
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.