That looks like a guy could just grab a similarly sized piece of metal and fabricate your own with a grinder and drill... Probably way cheaper than buying 1. Or go check at a truck junk yard... Probably pick one up for $10
Need this piece
Discussion in 'Ask An Owner Operator' started by John Bertucci, Jun 19, 2020.
Page 2 of 2
-
John Bertucci, PE_T and Wasted Thyme Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
im gonna try to use a piece of hard wood if I can’t find the pieceCattleman84 Thanks this. -
Attached Files:
John Bertucci Thanks this. -
-
Your Trucks & Parts Headquarters
www.vanderhaags.com/index.php
Try these guysJohn Bertucci Thanks this. -
Lots of truck junk yards in WY!!!!
John Bertucci Thanks this. -
If you can't get it from the OEM. Then vander haggs is a good junk yard to help you out.
John Bertucci Thanks this. -
-
Thanks to all, i have been able to find the pieces i need on vanderhaags, also found the contact to a nice truck junk yard in wyoming about an hour away so i am gonna be ok.
feldsforever and F4T6UY Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2