Considering that there are only about 20 left in active service (not counting training group trailers), statistically it's hard to take out the 9 series trailers.
Picking my own freight baby! My journey to & of being on Schneider choice, the Adventure & Numbers!
Discussion in 'Schneider' started by freightwipper, Jun 1, 2015.
Page 1875 of 1900
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Acually I looked at my logs and January was the last one I had. The others were Nov and Dec last year. Although I did pass up an empty at Home Depot in Luckey, OH just a couple of weeks ago.
The last one was TA959472...It was fixed up underneath, brakes, tires, rims, even had a tire inflation system installed. I remeber the weird stuff, I know. -
see the occasional used 94xxxx. usually Helice owned now. I chuckle "hearing" wipper complain......
91B20H8, mindes and gentleroger Thank this. -
The goal was to have all of the TA9***** trailers out of service by Jan 1 2018. The problem was a loaded trailer would hit an OC and need tires,brakes, etc and we would drop $1-3,000 into it, so the "sell by" date got pushed. Or the trailer just hasn't gotten into an OC empty to be taken OOS. Stu hates that they're still around as they weigh about 1,000 pounds more, which impacts fuel economy and results in overweight loads.
The non-sequitor is that even though they are old, they tend to be in good shape as they have had extensive maintenance done while "new" trailers are POS. I'm dealing with one ta17 trailer that had it's tandem puller replaced. The problem is they replaced it with one that is too long which is negating the counter balance of the spring, which required more force to pull the handle, which has bent the central rod. It's in a dedicated pool and we need it empty to get it repaired, but jackwad imbeciles keep putting it on the ready line, so it keeps getting reloaded. I think I finally have it isolated at a customer and will be able to bring it to a shop early next week. If I see it in the yard again, stuff is going to get real - that whole puller handle is going to go AWOL.drlmi Thanks this. -
Also, is it just me or do these ratcheting landing gear handles effing suck? Seems every #### one is rusted stuck or the bolt is loose and bent and you can't get it to stay up when turning... -
-
-
Schneider globalist profiting from pandemic suffering.
drlmi, dwells40 and Speed_Drums Thank this. -
I bet Schneider wishes they hadn't sold all the excess trucks they had left over after the great truck buying frenzy when ELDs became the law of the land.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1875 of 1900