Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

92 kenworth looking for ecm port

Discussion in 'Ask An Owner Operator' started by Onixrbaez, Aug 27, 2020.

  1. Aug 27, 2020 #1
    Onixrbaez

    Onixrbaez Bobtail Member

    5
    2
    Aug 27, 2020
    0
    Do anyone knows if a 92 Kenworth t800 has the ecm plug and if so where. It has a N-14
     
    Onixrbaez, Aug 27, 2020
    Onixrbaez, Aug 27, 2020
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Aug 27, 2020 #2
    Cummins_444

    Cummins_444 Medium Load Member

    605
    1,013
    Apr 28, 2008
    Northwest, IN
    0
    20200827_140915.jpg Under the dash above the clutch pedal. Should be a port by the actual ecm also. If its missing I would open the dash and see if its laying in the bottom of the dash.
     
    Last edited: Aug 27, 2020
    Cummins_444, Aug 27, 2020
    Cummins_444, Aug 27, 2020
    #2
  4. Aug 27, 2020 #3
    062

    062 Road Train Member

    5,849
    31,702
    Oct 20, 2013
    0
    Generally they’re just above the fuse panel. Is this a new to you truck ?
    The early n14 were mechanical
     
    062, Aug 27, 2020
    062, Aug 27, 2020
    #3
    Bean Jr. and blacklabel Thank this.
  5. Aug 27, 2020 #4
    Cummins_444

    Cummins_444 Medium Load Member

    605
    1,013
    Apr 28, 2008
    Northwest, IN
    0
    This one is a 93 with a n14. 20200827_141509.jpg


    If you have a hole there it is probably broken laying up in the dash space somewhere
     
    Cummins_444, Aug 27, 2020
    Cummins_444, Aug 27, 2020
    #4
    062 Thanks this.
  7. Aug 27, 2020 #5
    Onixrbaez

    Onixrbaez Bobtail Member

    5
    2
    Aug 27, 2020
    0
    I had a 94 w900 and that’s where it had it but this one doesn’t I opened the panel and is not inside and no there is no hole on panel. Is not a mechanical it has a ecm with the fuel cooling behind
     
    Onixrbaez, Aug 27, 2020
    Onixrbaez, Aug 27, 2020
    #5
  8. Aug 27, 2020 #6
    Onixrbaez

    Onixrbaez Bobtail Member

    5
    2
    Aug 27, 2020
    0
    I had a 94 w900 and that’s where it had it but this one doesn’t I opened the panel and is not inside and no there is no hole on panel. Is not a mechanical it has a ecm with the fuel cooling behind
     
    Onixrbaez, Aug 27, 2020
    Onixrbaez, Aug 27, 2020
    #6
  9. Aug 27, 2020 #7
    Onixrbaez

    Onixrbaez Bobtail Member

    5
    2
    Aug 27, 2020
    0
    I had a 94 w900 and that’s where it had it but this one doesn’t I opened the panel and is not inside and no there is no hole on panel. Is not a mechanical it has a ecm with the fuel cooling behind
     
    Onixrbaez, Aug 27, 2020
    Onixrbaez, Aug 27, 2020
    #7
    Bean Jr. Thanks this.
  10. Aug 27, 2020 #8
    AModelCat

    AModelCat Road Train Member

    27,709
    145,170
    Jul 7, 2015
    Canuckistan
    0
    Is this engine original to the truck or did someone swap in the N14 later on?

    If the truck came from factory with a mechanical engine and that N14 was put in later, the dataport plug could be anywhere. You'd have to start searching for it.
     
    AModelCat, Aug 27, 2020
    AModelCat, Aug 27, 2020
    #8
    Bean Jr., blacklabel and 650cat425 Thank this.
  11. Aug 27, 2020 #9
    Onixrbaez

    Onixrbaez Bobtail Member

    5
    2
    Aug 27, 2020
    0
    I have 2 of them, they use to be old Cocacola trucks and they both don’t have the port. I doubt Cocacola is gonna switch it
     

    Attached Files:

    Onixrbaez, Aug 27, 2020
    Onixrbaez, Aug 27, 2020
    #9
    Bean Jr. Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.