Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

My 2016 Kenworth t660 has no turn signals in front all the others work fine

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Thatrukingoat, Sep 7, 2020.

  1. Sep 7, 2020 #1
    Thatrukingoat

    Thatrukingoat Bobtail Member

    5
    1
    Sep 7, 2020
    0
    I've checked the chassis node fuses in the chassis load center and the fuses under the dash the bulbs were good and I don't see any broken wires anyone else have this problem
     
    Thatrukingoat, Sep 7, 2020
    Thatrukingoat, Sep 7, 2020
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 7, 2020 #2
    baha

    baha Road Train Member

    4,137
    2,834
    Jul 25, 2013
    ga
    0
    Did you change them to led. type if you put all led lights on you must leave one reg. bulb some where in the system to draw enough power to make all the led bulbs light up?
     
    baha, Sep 7, 2020
    baha, Sep 7, 2020
    #2
    Thatrukingoat Thanks this.
  4. Sep 7, 2020 #3
    Thatrukingoat

    Thatrukingoat Bobtail Member

    5
    1
    Sep 7, 2020
    0
     
    Thatrukingoat, Sep 7, 2020
    Thatrukingoat, Sep 7, 2020
    #3
  5. Sep 7, 2020 #4
    Thatrukingoat

    Thatrukingoat Bobtail Member

    5
    1
    Sep 7, 2020
    0
    I only have regular incandescent bulbs at the moment and I bought 2led replacement for the ones that aren't working, and those 2 will be the 1st l e ds on the truck
     
    Thatrukingoat, Sep 7, 2020
    Thatrukingoat, Sep 7, 2020
    #4
  7. Sep 7, 2020 #5
    baha

    baha Road Train Member

    4,137
    2,834
    Jul 25, 2013
    ga
    0
    Sorry thats what happens when your 3 sheets in the wind on a cook out day, were they blinking before you changed the ft bulbs, if you take out the bulbs and clean the contacts inside and get a test light and ck both ground and power contacts with 4 ways on then with each turn sig. on you may find the problem, i have found dimes and 1 cent coins down inside under bulbs from going to eat and tec. bent over and coins fell out of top pocket and into socket?
     
    baha, Sep 7, 2020
    baha, Sep 7, 2020
    #5
    RubyEagle Thanks this.
  8. Sep 7, 2020 #6
    Thatrukingoat

    Thatrukingoat Bobtail Member

    5
    1
    Sep 7, 2020
    0
     
    Thatrukingoat, Sep 7, 2020
    Thatrukingoat, Sep 7, 2020
    #6
  9. Sep 7, 2020 #7
    Thatrukingoat

    Thatrukingoat Bobtail Member

    5
    1
    Sep 7, 2020
    0
    I've already cleared the contacts
     
    Thatrukingoat, Sep 7, 2020
    Thatrukingoat, Sep 7, 2020
    #7
    baha Thanks this.
  10. Sep 8, 2020 #8
    Midlife Trucker

    Midlife Trucker Light Load Member

    281
    288
    Dec 3, 2011
    Shady Dale, GA
    0
    My 2021 Kenworth had this problem, and it turned out to be a metal staple that holds the wiring harness wore through the wire insulation.
     
    Midlife Trucker, Sep 8, 2020
    Midlife Trucker, Sep 8, 2020
    #8
    RubyEagle Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.