Hey friends I have a 2010 kenworth t800 Cummins isx engine and my oil pressure becomes very very low and the truck stalls. Then when I turn it off for 5-10 minutes I everything goes back to normal but not for long. When I change the filter it goes 2-3 weeks no problem and then after that the pressure starts to get low again. Any help will be greatly appreciated.
Oil pressure very low Cummins isx
Discussion in 'Experienced Truckers' Advice' started by Gurjap, Nov 18, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
How low is it going? Not sure about the isx but Cummins used to be low pressure/high volume
-
-
How low does it get? Cummins is usually 20 psi at idle and 40 when at 1500+ rpm
-
Are you using antifreeze? Get an oil sample and see whats plugging your filter
-
Had a very similar issue when my EGR cooler started leaking into the intake stream on one of my trucks. Never had it stall the truck though.
-
The one time I had that problem. All 6 piston rings were broken. Shop was changing the oil every 2 weeks till they got around to replacing the pistons and cylinders.
baha Thanks this. -
The last Mack I drove went through 2 gallons a day, still ran strong , got up to 3 or 4 a day, finally locked up.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.