Cummins n14 camshaft replacement
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Kenllah, Nov 22, 2020.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Got some bearings from agkits for the new cam. All holes were perfectly aligned. They went in nice and snug.
BoxCarKidd Thanks this. -
How many bad rollers did you have?
-
-
Celect or Celect plus? Check the engine brakes for cracked auto lash screws
BoxCarKidd and Dino soar Thank this. -
Plus. I'm guessing these are the adjustment screws for lash? I'll check them out.
-
Yes the adjusting screws. Cover the oil hole at the bottom of the plunger with your thumb & squeeze the screw. Look for a crack running up the side of the plunger.
Kenllah Thanks this. -
Gear heated up in the gas bbq. About 1.5 hrs on high. It's only about 34 degrees outside today. New gear slid right on. No hammer or banging anything. It's cooled down now and tight on the cam
-
offset key?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3