Advice needed please

I'm wondering if the excess on the tongue flap might stay put better when it's folded up underneath if you try using some of those tarp clips and bungee it. I bought a 4 pack just before I switched to reefer and didn't get to play with them but the back flap was often a problem for me. It liked to unroll from where I'd hide it no matter the bungees used...

 

You can p/u some 8ft 2 by 4 boards you see laying around loading yard and roll the flap at bottom around it and put a 2in strap over it to keep flapping down on both ends?

 

Fold it up. Put a piece of dunnage on it and strap the dunnage down. That's what I do

 

A board or timber is the only solution I ever found. But at 1$ ea and 6 would fit in large coffee cup.... vs my 4x4x8' coil rack timber hoisted up there...Worth trying IMO