I just purchase a older truck and can’t locate the city horn. It’s not working. If I press the button I can hear the fuse clicking.
1995 international 9400 city horn location
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Heavy pressure trucking, Apr 17, 2021.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
They are all under the rad/front cross member area.
Lostkeys, jamespmack, God prefers Diesels and 1 other person Thank this. -
FYI, I replaced mine. It didn't work, but you could hear the relay clicking. It had a large crack in it, and part of it was missing. Seemed like a no brainer. New one didn't work either. Turned out the terminals in the connector were spread, and not making good contact. Replaced the terminals, works like a charm. You might look into it before you buy a new horn.
spsauerland, Heavyd and singlescrewshaker Thank this. -
Yes always check for power and ground before replacing. Get a test light and check it while someone presses the horn button to make sure it has both going to it. If single wire to it make sure you have positive fire when someone presses it and ground to where the horn mounts.
Heavyd Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.