Hello guys!cummins isx oil consumption!

Discussion in 'Ask An Owner Operator' started by Xenergiserx, Jun 1, 2021.

  1. bzinger

    bzinger Road Train Member

    16,227
    62,767
    Dec 10, 2014
    omaha , ne
    0
    And if it makes you feel better I know 2 other people with the same issue you and I have and had that ran theyre isxs out past 900k dumping oil in them before they blew up knocking a hole the block .
    You got a longs ways to go lol.
     
    Xenergiserx Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    7,253
    14,398
    Jan 20, 2010
    Hesperia, Ca.
    0
    Throw a gallon of Wally World tech 80/90 gear oil in it. According to RAWZE website, its recommended by the Cummins guru.
     
    Xenergiserx and bzinger Thank this.
  4. Midwest Trucker

    Midwest Trucker Road Train Member

    5,771
    20,598
    Aug 31, 2018
    0
    You would have big time performance issues if you still had the DPF. Your in your last leg my friend.
     
    drivinhome and Xenergiserx Thank this.
  5. Xenergiserx

    Xenergiserx Light Load Member

    107
    60
    Feb 2, 2021
    0
    Wait What! Is Wally World? waltmart? Supertech brand?
    Gear oil at 80/90 that’s very heavy stuff. Will that help with the oil lost ? You got this rookie confused . lol help me out
     
  6. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    7,253
    14,398
    Jan 20, 2010
    Hesperia, Ca.
    0
    Yes, Walmart Supertech gear oil. It’s no different than Lucas at half the price plus it has additives that the newer oils don’t have anymore. GL 4 or 5 is want you want to add. 80/90w is what you can start with, or go with the 85/140. Its not gonna hurt anything. Check out RAWZE. c o m site. Or Bob the oil guy. Very informative sites.
     
    Xenergiserx Thanks this.
  7. drivinhome

    drivinhome Light Load Member

    91
    102
    Sep 16, 2009
    Southeastern Mass
    0
    The thicker weight oil will lessen the oil you need to add. It will buy you some time but be prepared to do an inframe as it is inevitable at this point. There is no way to know how long you have just baby it as much as you can until you can do the inframe.
    Keep in mind the current issues with parts availability is really bad right now and only getting worse. If you can get the parts ordered ASAP so you won’t be waiting for parts when the time comes to do the job.
     
    spindrift and Xenergiserx Thank this.
  8. Ridgeline

    Ridgeline Road Train Member

    20,716
    100,900
    Dec 18, 2011
    Michigan
    0
    If you want to really know what’s going on, get a dyno with a blowby, the blowby will tell you what condition the rings are in.

    oil samples should have been done anyway,
     
    Xenergiserx Thanks this.
  9. mudflap77

    mudflap77 Heavy Load Member

    852
    1,302
    Oct 11, 2010
    South western Ontario
    0
    What oil are you running now?
    If you are using 10w30 switch to 15w40 at your next oil change.
    It makes no sense to use and burn lighter, more expensive oil and then add something to thicken it up.
    If you are not very far into this oil change you could get 3 or 4 gal of the blue restore and add it as you need to or drain off a bit of oil and add the 4 gal at once. This might prolong your overhaul for 400 bucks.
     
  10. Xenergiserx

    Xenergiserx Light Load Member

    107
    60
    Feb 2, 2021
    0
    Brother. What oil brand should I used
     
    bzinger Thanks this.
  11. bzinger

    bzinger Road Train Member

    16,227
    62,767
    Dec 10, 2014
    omaha , ne
    0
    I'd keep doing what you have been doing.
    A gallon of oil in 3200 miles is not excessive so I'd keep changing it regularly.
    I didn't write mine off until it got down around 1500 on a gallon .
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.