I'm looking for a part number or recommendation for a barring tool or way to turn the engine over for running the overhead. I'm probably over thinking it but wanted to check.
Thanks
Maxxforce barring tool? Want to do an Overhead on it.
Discussion in 'International Forum' started by WMGUY, Oct 13, 2021.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
NavistarService: TOOL, ENGINE TURNING
You can make one if you have a welder, drill press, old socket and a 3/8” plate.
I have one here somewhere that I got in collection of tools from a fleet I bought. No one could figure what it was for but found the above link -
MF 11 or 13 I just used a socket and long 1/2" ratchet on the bolt for the accessory drive pulley where the fuel pump is. I think it takes a 15 or 18 mill socket. DT series, I just turn from one of the vibration dampener bolts.
-
I appreciate the info!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.