Transmission rated at 1650tq, and clutch rated at 1850tq. Transmission is an automated Eaton UltraShift. My truck is turned up from 1550tq stock to 1625tq tuned currently. Can I bump it to 1700tq safely?
Transmission rated at 1650tq and clutch rated at 1850tq…
Discussion in 'Trucks [ Eighteen Wheelers ]' started by 2013Maxx, Oct 22, 2021.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Why bother? What’s the point?
If you have the auto, because you don’t like/can’t shift, why worry about the engine hp/torque?
The transmission is doing your work for you.Attached Files:
-
-
just put it up to 1850 and be done with it
2013Maxx Thanks this. -
-
-
This is like asking if you should burn high octane racing gas in a VW ..
Pamela1990 and Bean Jr. Thank this. -
Attached Files:
Pamela1990 Thanks this. -
-
I’ll just call Eaton with my part number. I know some transmissions can go 100 or 200 over and some can’t. Just was trying to see if any turnt up guys with experience was in here. Y’all be safe on the road. Peace..
-
No manufacturer of a component would ever recommend using a component over its rated capacity. When it blows apart you would then have someone to blame, regardless if you ever intend to do so or not.
So and so said its was OK?????AModelCat Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3