94 T600 remodeling

Fuel tank and side fairing removal
Remove single driver 150 gal, install new twin 120s

All new stainless fuel lines bridgestone hose in indianapolis, great job (but $$$$ as hell)

Pete style step box install

Properly mount rear sleeper with new bushings/repair/strengthen mount locations

All new bolts on every spot i removed one (and the new 9 holes i put in the frame)

Miscellaneous small repairs


After



Before


Cant imagine why i thought i needed to replace the tank hangars


Test fit new hangars


Previous location of air tanks (mounted to old fuel tank hangars)


This is a pita setup for how to mount the drivers side battery/step box, had to have custom mirrored brackets made for passenger side and drill that extra top hole on pass side


Refabrication and frame strengthening of the exhaust support, drivers side, includes rear mounting bracket for batt/step box


Actual tank hangar install, had to attach straps to top before install cause i can only turn my ratchet 5degrees on the t-bolt in the bracket



Battery box wired up, not much space and will clean it up some more, but i was able to jam all 4 batteries in there




Tool thats great even if chinese garbage, couldnt have done it without this.
Mag drill (in place ready to drill)

 

All in all, an experience, thanks to everyone that gave advice along the way. More to come im sure

 

Before/after in same pic

 

Yeah but having been down a while, gotta make more cheddar

 

Looks sharp

This remodel alone was 8k plus downtime and as per usual, still got stuff to do