This might not be the correct place for this question but.....
So I recently got a 2023 Volvo with the thermoking apu. Now that I looked, I see that it has a little bunk heater. I'll post a picture of all the controls I've got. No matter what I do, I can't get the bunk heater to do ANYTHING! When I push the left button to turn apu on and move left knob to heat (right), the little light flashes for a few seconds, then stays solid but nothing happens. I used to have a freightliner (no apu) that had a separate little controller for the heater. This truck only has the apu controller, then there's the control panel in left of pic. I've even used the left panel to select "heat" then on but nothing. Am I just missing something on how to turn the bunk heater on?
No heat from thermoking apu /webasto bunk heater
Discussion in 'Questions From New Drivers' started by Sixela918, May 27, 2022.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
The picture shown does not show the fan in on position.
Try turning the fan up.
On my international there is a dash switch that must be in the on position for it to work. -
if its like mine....the fan switch has no bearing on the heat...its for the fan/AC only.
tscottme Thanks this. -
Likely a clogged fuel line and filter is my guess.
-
-
-
One video on the YouTube said that you actually use the Volvo control panel (left in picture) to control the bunk heater. That didn't seem correct to me. Tried that too and nothing.
-
-
Sixela918 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2