Moving a tipped over dump trailer

I bought a quarter frame trailer that has been tipped over and is currently sitting upright. The auction company was originally going to load it for me…now that they have their money they won’t. I have the capability to pick it up and put it on a trailer but with 5+ dollar fuel moving it to the location isn’t cheap.
Bottom line is how well does it go to hook onto something like this and pull it about 50 miles with plenty of backroads available. The arms are bent but not broken and the fifth wheel plate is ate about a 15 degree angle. Was thinking about hooking up to it sideways
I am sure some one out there knows something about this please inform me

 

That’s probably going to cost more than the trailer…and certainly more than a second trip to move the 950 in

 

If I had some I would have shared but I didn’t think to take any because I had everything under control until I was told I was on my own

 

Well it made it to my shop this morning.
Pulled it down the road like nothing was wrong and disappeared on the backroads until the last 1/4 mile if highway to the shop. It took some enginuity to get it connected and those arms are a lot stiffer than I expected I had to run one axle lock and power divider because the left drive tires were barely on the ground
thanks for the advice everyone