Hit a deer, new steers, alignment and still balding. Help!

they may have only adjusted the "toe", you hit a nearly (up to) 200 pound deer..??

you might have a bent part (or 2)........

 

Honestly, I'd say that once it starts, it doesn't stop.
And, I'd say you probably had a problem before the strike.

A truck is a funny and fickle thing.
There can be the smallest thing jacked up in your steers, your drives, your shocks, or whatever.

Good luck

 

Alignment shop should be able to tell if something is bent to be that far out of wack. Is there anything rubbing on the tire from under the fender or bent fender itself? Or plastic bumper blowing back in the wind making contact.

 

Did they use a machine or do it the old school way? I've had many machine alignments on my truck it always pulled and had strange tire wear. I just dealt with it for years.

Then, I got new steers put on at a shop that didn't use a machine and the difference was staggering. A major improvement! No more pulling and tires finally wearing perfectly.

 

What is the guys name? If it is who I think it is you are in great hands and he will get you fixed. You should also check your steering column for any small cracks. I had an issue like that and that was the problem and took me a while to figure it out. Might not be your issue but worth looking at.