I’m surprised you wouldn’t want Atleast tall 22s for ground clearance if not 24s, 11r22.5 and a 3.55 i cruise about 1700 at 65 in 8th direct, almost wish I had 3.70s for the heavier stuff but I can make due
I like my tires all the same size because I have ocd and that stuff irritates me
3.25 rearends 9 speed Trans Converted to 13 speed. Want to upgrade
Discussion in 'Ask An Owner Operator' started by Brandon0928, Nov 16, 2022.
Page 4 of 6
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
I’ve always ran low 22’s and rarely drove faster than 70 when I was hauling cattle. This truck had 3.70’s and a series 60 Detroit with a 10 speed.
This truck had 3.55’s with a 2LW Cat and a 13 speed.
This truck had 3.36’s and an MX13 Paccar with an 18 speed.
If you want to run 70mph or lower and be in that 1600 range or so I’d say 3.55’s after you wear out your 3.25’s.OLDSKOOLERnWV, cke, Brandon0928 and 1 other person Thank this. -
OLDSKOOLERnWV, cke and Long FLD Thank this.
-
-
It would really depend on how you like the truck to perform. If you want a little more low end I would say go with the 3:55 with the low pros
Brandon0928 Thanks this. -
Snowwy please explain to us why all the drums and tires need to be the same size for optimal effectivenessVampire, Last Call and Jubal Early Times Thank this. -
Mismatched tire sizes on a car with 4 wheel ABS would make the brakes work like crap but I don't see how it would affect two or more separate units hooked together.
-
Brandon0928 Thanks this.
-
Yea don’t say nothing….!!!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 6