Have a bulk lube truck, currently has a Blackmer pump. Want to swap out with a Roper, but this truck the pto runs counter clockwise(ccw), have a Roper that runs clockwise(cw), are Ropers direction ‘changeable’? TIA
Change pto direction on Roper
Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by Lazer, Nov 28, 2022.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
What model do you have? I believe they all can run either direction
near the bottom it says either direction -
You could always swap the hydraulic hoses.
snowman1980 Thanks this. -
Sounds like it’s run with a shaft
-
3617 is the model pump. Yes pto shaft from an Eaton Super 10.
-
The Blackmer seals don’t hold up well pumping 80w-90.
Cat sdp Thanks this. -
I figured easier to swap pumps, than try and procure a pto for a Super 10, that runs clockwise. lol
Blackmer was coming off anyways. -
-
Got it figured out, unbolt the front drive housing, turn it 90 deg. Re-bolt on, do the same with the rear housing. Thanks for everybody’s help.
ChicagoJohn, Jubal Early Times and Cat sdp Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2