First off i have a corba 29 Nightwatch WX ST that i bought from a friend that we talked back and forth with driving to work on the weekend from MI to WV. So it worked and i knew it did but now i cant talk out and the meter on the radio isnt even moving. Can anyone please help me out.
Thanks,
Alan
Cb receives but cant talk out
Discussion in 'CB Radio Forum' started by ao2005, Mar 7, 2010.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Thought i should add new mic and still no workie. Is it the radio or is it the antenna and coax. Antenna is a 5Ft firestick with some cheap radio shack coax.
-
anyone have any thoughts or need more info
-
possibly the finals have burned up? How was the SWRs when he had it also when you set it up in your vehicle? If you or him have talked on it with a high SWR it is most likely one of you have burned the finals. But the good thing is that you can get them replaced with a Mosfet and get a little more power from it.
-
What was is your antenna system?
-
swr's when he had it i dont know. I has the swr calibration built in so i always tried to keep them close to 1.5 as i could. This same thing happend before but it started working agian. i am going to use this radio in my truck when i start driving if it works.
-
-
ok just looked and the coax says rg58/L22
-
Just a thought, are you sure the switch is set to "RF" if its not the meter would not move. Other than that with a good known mike, it would have to be the radio, whether the SWR is correct or not
-
i just bought a cobra m77 noise cancelling mic the other day
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3