tried RF chokes on speaker seads, I put them as close to my amp as possible. Did not change anything. relocated grounds to different spot on frame and did nothing. I can also talk on mic and here my voice through speakers. Not sure what to do. Nothing seems to fix it.
Screaching noise in speakers still there
Discussion in 'CB Radio Forum' started by shane 102, Mar 9, 2010.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Try putting the chokes as close to the speaker terminals as possible.
-
Hi Shane 102. Is the amp a cb amp if so how many watts out.
-
-
Some alternators will put out a whine that speakers / amps pick up. I dont remeber the fix on this?
-
The chokes are on the speaker wires. I put them about one inch from the back of the amp where the speaker wires connect to the amp. The amp is a 120 watt max output stereo amp. I have more chokes, I will put some on the speaker leads by the speakers.
-
-
Ok, the problem is fixed. I have a toggle switch wired to a back up light. some haw power was feeding through toggle into the amp or cb (not sure which one). Replaced toggle and rewired and screach is gone. When I turn on my back up light I still get feedback when mic is keyed. not sure how that is possible but it does it. I can live with that cause I will rarely back up and talk on cb with music on. Thank you for the info and help, I learned a lot.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.