Muck Boots 'n' Slickers - Life of a Livestock Hauler
Discussion in 'Experienced Truckers' Advice' started by Cattleman84, Jun 14, 2021.
Page 1454 of 1471
-
Deere hunter, cke, exhausted379 and 11 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
ATL Diesel should have just the actuator. It needs to be calibrated. I have done it manually before, no laptop, but I don't know if it works on that model. The one I did you set the vanes at the 22 degree mark and install. It will cycle a few time to relearn position and it should work.
That being said if you ain't married to the idea of just doing the actuator I'd recommend replacing the whole shooting match.Deere hunter, cke, exhausted379 and 12 others Thank this. -
I went aftermarket. I know alot of isx guys say only stick with oem with everything but its hard to find oem stuff right away and its incredibly expensive for everything... the turbo i took off was from hd-turbo no idea how many miles on it.. i bought one from momentumworx, company out of PA. Pretty sure its just chinese made but ill see how much life i get out of it. No complaints so far after about 3k miles... Ive used some stuff from atl diesel as well and they seem ok, but i dont have alot of miles on anything yet so its hard to know.
-
I was actually looking at momentum Works website, I really like their prices compared to some othersDeere hunter, cke, Feedman and 8 others Thank this.
-
I was reading on Rawse forums, and found 3 instances where he mentioned a plugged muffler doing what my truck is. Trying to decide if he’s FOS or if I should use it as an excuse to put a set of real pipes on
Deere hunter, cke, exhausted379 and 10 others Thank this. -
I just ordered an injector set from them so i can replace all 6 on mine, instead of playing wack o mole with the dam things sticking open on me.. can say their customer service is fantastic and fast shipping all the way to here in az.Deere hunter, cke, JolliRoger and 8 others Thank this.
-
Over 20 years of trucking and this morning is the first time blowing out a steer tire at 70 mph. I got lucky and maintained control until I got stopped.
Good morningDeere hunter, cke, exhausted379 and 15 others Thank this. -
That’ll shore nuff get your attention.
I blew one back in 2009. About a year after I started. Knoxville TN, rush hour, it’s an attention getter.
Considering the abuse a steer tire takes, I’ve been amazed it doesn’t happen more often.Deere hunter, cke, exhausted379 and 14 others Thank this. -
Scary for sure I can see why a driver would panic
cke, pete781693, Feedman and 12 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1454 of 1471