I have no voltage to the 5 marrker lights in the visor. Fuse is ok . Anyone can tell me the routing of wire under dash to where it exits the roof at visor? Id number and splice locations would be big help.
wiring schematic 2003 volvo vnl
Discussion in 'Trucks [ Eighteen Wheelers ]' started by jlawall, Feb 5, 2011.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
remind me your e-mail addr, I will send you LCM shematics.
Trace all LCM codes with dashboard computer and post codes here
Sometimes LCM fuses fail. -
-
Thanks for the diagram. This truck has no capability to read lcm codes I assume because it is 2003 model year. Sure would help to have some idea of routing of wire from fuse block to visor.
-
'03 are all Version-II, all light is controlled with LCM
-
Thanks again Pablo. When I get back to the '03 I'll check that out. Meanwhile my '04 is throwing a code mid 128 pid 27 fmi 4. Black smoke and power derated. I assume egr valve needs replaced? Engine is 500 cummins. Also can you explain mid pid and fmi ?
-
Is there a chart any place with all the Volvo fault codes?
I show MID 128 SID 146 FMI 7, but it doesn't show as active or a date and time.
On an '07 780 with 530 ISX. -
it is ISX EGR issue. Cleare code and if it will appeare againe check EGR system and replace EGR if necessary.
On 871 EGR is CAN controlled, so check wiring first -
-
Do you have a link to the manual for a 2001 vnl with a Detroit ?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4