Post your flatbed load pictures here
Discussion in 'Flatbed Trucking Forum' started by the gambler, Dec 8, 2011.
- Thread Status:
- Not open for further replies.
Page 74 of 785
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
A little bit of FLD info and specs from the later models:
http://selectrucks.com/Models/HeavyDutyTrucks/FLD.aspx
http://selectrucks.com/pdf/Models/fld120sd_brochure.pdfkajidono and The Challenger Thank this. -
The Challenger Thanks this.
-
The Challenger and alex94 Thank this.
-
-
Would that thing be used on a derrick drill site for oil or natural gas??
KH -
John Deere 840K I brought down to OKC this past week.
Got lucky with it. That step I am pulling has a 33 inch deck height so I was exactly 13'6". Our usual step is like a 39" deck but we have a few of these with the deck lower. Bad thing is it has wheel wells above the deck. I did still manage to put a load of plywood and those kinds of things on the same trailer. I just had to put a few of my 4x4s down to level it all out.Attached Files:
The Challenger Thanks this. -
-
KH -
The Challenger and osokusmc Thank this.
-
Milskired--all of our steps have the wheel wells. 1/3 are Wilsons, like yours (except 48'). The rest are square wheel wells. What did it look like when that 850 came on to the back of your trailer?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 74 of 785
- Thread Status:
- Not open for further replies.