If you don't know what your next load weight is going to be, how much fuel will you have in your tanks before you make the p/u? (or do you know the load weight before you get to the shipper?)
Full tank? Half tank? Are there different strategies for different situations? If so, any examples to be shared and why would be appreciated. Wannabe curiosity.
Thanks. SSender
Best strategy: New load and how much gas in tanks before geting the load
Discussion in 'Questions From New Drivers' started by SatelliteSender, Apr 14, 2012.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Some shippers like Anhueser Busch(sp) will preweigh truck before loading. This so they can see how much they can put on the trailer. Anyway IMO its always a good idea to fill up prior to loading. Its easier and cheaper to unload a pallet or two than to put fuel the truck every day.
SatelliteSender and allniter Thank this. -
I always went in with full tanks so they wouldn't load me so heavy that I had to keep my tanks low !
I have had places load me on the scales so they can ship every ounce they can !SatelliteSender Thanks this. -
I've had it happen a couple times where I was too heavy to take their load and they refused to take product off. That costs me money in the fact I have to retreat back out to a nearby truck stop and wait for some other load. If I drove 100 miles to get the load, I won't be paid the empty miles either. So it becomes a double whammy.
My strategy is to try to show up at the shipper with no more than about 3/8ths fuel. Sometimes though, they want you to have a minimum of 1/2 tanks so you can go the minimum distance of 200 miles before stopping due to the high dollar sensitive freight back there.
As an owner operator I generally use 7 miles per gallon as my factor for each load and how many gallons to buy and still be profitable. I don't like to over buy fuel too often unless it benefits my business tax-wise or I know for sure there will be enough fuel left over to run that one more load before the week ends on the fuel I have left. So I would generally put in about 65 or 75 maximum gallons per day. Usually just 50 to qualify for that free shower.
The other day I was real low on fuel, I grabbed 50 gallons before I got to the shipper, got loaded and went right back there and grabbed 50 more. This was in Wisconsin (high fuel tax). Then jammed down to Bloomington IL and grabbed 60 more gallons (enough to finish the load) for the 3rd time that day. Plus I had to put the trailer in the shop for a burned out light and scored 4 showers on the day because the light work costs $52 buck (anything over $50 gets a free shower). -
Thanks for the viewpoint.
SSenderscottied67 Thanks this. -
I read a post here on TTR where the driver stated they could not be dispatched on a hival load without having 3/4 full tanks. I guess it's a balancing act in the end.
scottied67 Thanks this. -
That second $50, 30 minute fuel stop cost you $9.50 at $0.38cpm for a $10 shower ticket. You're an O/O, so it probably cost you MUCH more. And it could have cost you a 1500 mile run because you were 30 minutes short on your 70 for the week to be able to accept it.scottied67 and Pmracing Thank this. -
It sucks having to go back and lose a pallet. It happens. It will happen. I go in with whatever I have. Never really think about it. If I know its gonna be on the heavy side I go in light on fuel otherwise I just show up. I seem to spend a lot of time right around 80300. Might be my number. Old heavy Pete and stainless spread.
scottied67 Thanks this. -
Tazz, scottied67, Hitman and 2 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2