Ok, here's the deal. I am replacing the thermostats in my C15 6NZ. I finally got the thermostat housing off the engine. Thermostats are stuck in the housing tighter than tight. How can I remove them without destroying the housing. Thanks in advance.
c15 6NZ Thermostat removal. Somebody help me Please.
Discussion in 'Trucks [ Eighteen Wheelers ]' started by silver dollar, May 21, 2013.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
silver dollar Thanks this.
-
-
I never have, but its up to you.
-
silver dollar and eeb Thank this.
-
anti seize is your friend!
silver dollar Thanks this. -
Wouldn't be the first time I was wrong
-
-
Put lots on the whole length of the bolts, that will stop the aluminum housing corroding and giving you problems next time.
ingedavi and silver dollar Thank this. -
Did you replace the seals? Are they installed the right direction?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2