PM sent. Thanks Mark, this will make it easier to plot my trips. Right now I have a lot of roads listed as avoid so the Unit won't try to route me through border crossings that I can't use but sometimes it still tries to route me there, this should solve those problems.
Suppport Thread for the TND 500, TND 700 or future Rand McNally products.
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Apr 16, 2010.
- Thread Status:
- Not open for further replies.
Page 725 of 756
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Thanks,
Mark -
Downloaded and installed Border Crossing POI's. There are only 2 listed for each sets,is this all there is or did it not download properly. The ones listed are not the ones I usually use, Osoyoos BC and Pac Hwy are not included in the list. Sorry should have opened the lists on my pc as I see there are lots more,guess they didn't install properly so will try to import again. I see the problem, there are several not on your list, on the US side Oroville WA on Hwy 97 and Laurier WA on Hwy 395. On the Canadian side Osoyoos BC on Hwy 97 and Cascade on Hwy 395. It seems that it only lists the ones in the immediate area of the gps and doesn't show a full list or just shows the ones along your route. I believe Sumas WA Hwy 9 is also missing, not sure if Surry is same as Pac Hwy(designated truck crossing on Hwy 15) and Abbotsford BC Hwy 11 also not there. Hope this helps a little.
Thanks
JohnLast edited: Apr 22, 2014
-
After a periodic update I ran the diagnostics on my 720.
No real reason to. I just do that from time to time.
Unit works fine as far as I can tell.
Had 23 files with issues.
Ran repair.
Repair failed.
Tried it again.
Repair failed.
Uninstalled and reinstalled dock software.
Repairs still failed.
What should I do next, if anything? -
None of my Werner drop yard, terminal, fuel stops or truck wash info loaded. some of the clearance heights stuff loaded. I'd like to be able to make the werner stuff all work.
can you post a screen shot of what the .csv files are supposed to look like for the Rand McNally TND 520? -
IF you do by route, it should show any that are within your route.
I will look at the ones you listed and add those.
Like I mentioned, still in Beta grabbing info.
Thanks,
MarkLast edited: Apr 22, 2014
-
Thanks,
Mark -
Building the .csv files are a little tricky.
Thanks,
Mark -
thanks,
Mark -
Really appreciate your efforts in this project.
For Osoyoos trucks normally follow same routing as cars, only one entry lane, there is a truck lane set up there but never used.
For Oroville you keep to the curb lane as they always use the truck entry as when you go through the reporting kiosk you turn right and go through the xray machine.
Also at Laurier/Cascade on Hwy 395 loaded trucks can enter northbound into Canada but not southbound into the US as they don't have an xray machine. This crossing is also closed from midnight to 7am both ways. Empty trucks can go south.
Thanks
JohnLast edited: Apr 22, 2014
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 725 of 756
- Thread Status:
- Not open for further replies.