Hey guys
I recently got this truck and im having light issues
I keep blowing the f18 30amp (driver side light fuse) fuse when i turn the high beam on
I know continuity is good in the engine bay, it is definitely under the dash
I just thought i ask a question here before i pull the dash out .
It had some bad relays and it used to have a qualcom or whatever im removing all its wires slowly.
I also have no 4 way hazard light on the back of the bobtail everywhere else is fine , turn signals are working properly.
I got a spare hazard and high beam switch from the junk yard that didnt fixed the problem.
Thank you!
01 volvo vnl 770 n14 low beam/high beam wiring issue / hazard light
Discussion in 'Trucks [ Eighteen Wheelers ]' started by zolika, Jun 12, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I've had problems at the hnge where the hood opens and the wires run from truck to hood. Cables were frayed and they were grounding out on the bumper.
Don't worry, between air leaks and electric gremlins, you are on par for owning a volvo. -
thank you i'll check it
do you know where you can get a factory service manual for these trucks?
i could really use a wiring diagram -
Update on this one? I got the same thing going on
-
not really i've made it work temporarily but i wanna make it back to factory
please update me if you find out something
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.