EGT is a pyrometer. Same thing. Without the sensor, no workie. A new exhaust piece ( or you can drill and weld the right size nut if you're handy like that) typically is $100 and a sensor will run you about $60. I don't know how to hook it up to the ECM as mine came with it and I just replaced the parts.
scan gauge
Discussion in 'Ask An Owner Operator' started by heavyhaulerss, Apr 19, 2015.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
The D will show fuel cost per mile as you drive down the road.
Instead of fuel cost per mile, the KR will show revenue less fuel cost per mile as you go down the road. And it can also convert that to an hourly rate.
The KR can also display the ECM odometer reading, something the D cannot.
That's pretty much it. Supposedly the KR sampling rate for the instantaneous mpg readout is smoother, but I don't notice much difference between it and the D when the D is set to "update slow." -
double yellow Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3