Scooter, can you please provide the part numbers for the single pierce shaft and anything else used in your repair?
VOLVO STEERING SHAFT RECALL 2.0
Discussion in 'Volvo Forum' started by Scooter Jones, Mar 16, 2016.
Page 4 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Unfortunately, the service dept. didn't provide me with any of that. I'm certain I could get it if I needed, however, I know that all that stuff is kept in their database.
-
My truck slipped through..built in 11/14.
Bought it off the lot on 12/15.
Same 2 piece steering shaft though.Last edited: Mar 25, 2016
-
Hope people get their trucks in to get inspected.
DOT will put those volvos out of service and ticket on the spot. No truck stop yammering or internet BS. Go get it inspected and get documentation to show if you get pulled in/over by the DOT. -
I'll see if I can find part numbers but there's an upper shaft lower shaft. 2 bolts and 2 nuts. Rubber boot and a 2 piece clamp that slides into the rubber boot. And to my knowledge that is the part that most places are having the hardest time getting
-
Even if you can fix it your self you still need to have the unit inspected by a Volvo dealer/mechanic.....unless you are certified to make such repairs and sign off on it.
Trust me on this lol. If you do the work yourself and fix it.....and you get pulled into a scale and do not have proof you had the recalled part inspected/repaired by a certified mechanic/dealer......you will get put OOS and get a ticket. -
-
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5