Hello All,
Can I crack like this pass inspection? The frame was previously cracked, repaired with an insert added and it cracked again.
Crack in repaired frame
Discussion in 'Ask An Owner Operator' started by CL10473, Jun 13, 2016.
Page 1 of 3
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
The only way that will pass an inspection is if the inspector is blind. And whoever repaired it like that should never use a welder again.
tommymonza, spyder7723, Pedigreed Bulldog and 8 others Thank this. -
I can't see why it wouldn't pass with a proper repair. People stretch truck frames everyday. Only way to do that is to weld in another piece of frame.
-
-
Fix it properly and it will pass.
-
If that insert is not welded into the frame it will crack again because it is bolted and will move slightly. The bolts are good but it should also be welded.
Dave_in_AZ Thanks this. -
It's a Kenworth right?
-
It would be no big deal to fix. I could do it in an hour. Spend a couple hindered bucks and fix it and forget it.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3