Post flatbed load photos here V2.0

I don't know. Must have come that way because both sides are the same and there's no empty hole for the wires further back.

 

I see. Looks like a lack of attention to detail on the manufacturer's part then. Shame on them!

 

Yea, just looked at pictures of the other Benson step I pull and it's the same. I can't see why they would do that though. There a nothing back there that would prevent them from putting it in the right spot.

 

Luckily there's a solution. Just keep adding more markers until she's all neat.

 

Good suggestion.

 

The guy making the wiring harness messed up

 

He knocks the dust off his tarp(s) once or twice a year.

 

@Dye Guardian has a very Keen Eye for Details

 

Yes but he's got bad luck with tires and wiring. Maybe he should spend more time looking at his own junk

 

And my front diff is leaking and I need suspension bushings even though the truck just had an annual inspection which it somehow passed.

Oh and don't forget the white smoke from under the hood from time to time. No air ride in the seat because a hole was rubbed into the air line and has been pinched off with a pair of vice grips ever since. Sleeper curtain does not close because the zipper failed and needs replaced. The transmission makes me wonder sometimes. The cab marker light went out completely but the dash backlights come on again.

But other than that, everything's OK.