Oops....

Discussion in 'Heavy Haul Trucking Forum' started by Cat sdp, Oct 25, 2017.

  1. nikmirbre

    nikmirbre Road Train Member

    5,049
    8,690
    Jul 27, 2011
    High Point NC
    0
    It looks as if the rear wasn't turning.......
     
    not4hire Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. not4hire

    not4hire Road Train Member

    7,142
    26,948
    May 16, 2012
    Calgary
    0
    I was thinking the same. It looks like both sets of axles on the rear are crabbing to the right (towards the camera), but then the forward set should turn in the direction of the truck, but don't. You can see the fender on the rear set bear down on the tires as the load slowly twists to the right
     
    Bean Jr. and nikmirbre Thank this.
  4. TripleSix

    TripleSix God of Roads

    17,774
    124,764
    Apr 10, 2009
    Copied in Hell
    0
  5. cnsper

    cnsper Road Train Member

    5,869
    27,420
    Feb 28, 2014
    0
    You all missed the biggest thing. No the front set does not need to follow the truck. As a matter of fact you steer opposite the turn. Crabbing in certain situations is what you need to do. If you watch closely you can see the only steering being done was the rear set of axles.

    If he had been crabbing with both axles he might have been ok but no guarantees.

    Here is what he did wrong

    1. He was moving too fast for steering response on the dolly.

    2. When you corner like t hat you drop the front neck of the dolly to reduce the lateral force from the turn.

    I have run that exact setup several times. We always drop the neck when making turns like that. You will see that the neck on the dolly is dropped because when you turn it swings out from under the beam.
    IMG_20151012_101204788.jpg

    Here is a video my pilot took one day. It is a 3 axle but the process is the same. The three axle does not have a neck like the 6 axle dollies do.
     
  6. m16ty

    m16ty Road Train Member

    2,212
    4,859
    Jan 22, 2016
    0
    The main principle behind pre-stressed concrete is concrete is very strong in compression, very weak in tension. The tensioned cables are there to always keep the concrete in compression.

    Beams like this are also engineered by the shape of the beam and the cables, to be very strong on one position (usually force applied straight down from the top) but can't take much load from the side or twisting. This beam could probably hold 100s of 1,000s of pounds from the top but can't even support it's own weight from the side.
     
    Bean Jr., kylefitzy, 1951 ford and 2 others Thank this.
  7. hammer1022

    hammer1022 Bobtail Member

    9
    25
    Oct 30, 2017
    0
    Just out of curiosity, was that a self steering trailer or a remote control steer?
     
  8. Jumbo

    Jumbo Road Train Member

    3,669
    7,388
    Sep 4, 2009
    Appleton, Wisconsin
    0
    Remote more than likely
     
    hammer1022 Thanks this.
  9. cnsper

    cnsper Road Train Member

    5,869
    27,420
    Feb 28, 2014
    0
    Wireless remote. Eked some concentration to steer the truck and trailer at the same time
     
  10. hammer1022

    hammer1022 Bobtail Member

    9
    25
    Oct 30, 2017
    0
    Didn't mean the driver was steering, there are new model trailers that "self steer" that adjust the rear based off the position of the trailer to the fifth wheel plate.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.