No power. At a loss here. Losing hair.

You won't but the guys there are familiar with that programming you have installed. It is the same crap programming these sham outfits use on the Cummins.

 

This kit you bought? Did it involve any programing or was it just a bunch of plates and tubing?
I am assuming there was a programming module or something? Or am I assuming wrong?

 

Yep, that is what I was thinking. I know on our Cummins there are several files needed to do this stuff properly, odds are they simply turned a few parameters off to trick the motor, there was no fueling or turbo table adjustments, that is evident from your fuel economy and turbo acting up. Is she smoking? I bet you are just dumping fuel into the motor.

 

The other issue is with the DPF having holes drilled in it. All of that heat is being trapped up at your turbo. You are cooking it and the motor.

 

Good to hear, some of these programs do some wild things, heavy fuel consumption is one prior to boat anchoring the motor. I would still call the two numbers I gave you. And if it were me, and I am sure others will chime in and tell me I am full of it, return the motor to stock until you know what is actually going on with the motor.

I know my Cummins, and from what you are describing things are not right.