Replaced oil pump, checked pickup tube for cracks, replaced complete oil filter housing still no oil pressure even over filled with engine oil to make sure I didn't miss a crack in the pickup tube, anyone have this problem before?
No oil pressure on a 2013 maxxforce,
Discussion in 'International Forum' started by Szach, Feb 19, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
-
What model engine do you have?
-
Maxxforce 13 I do believe
-
Hmm, those do not have oil lines feeding the air compressor, direct oil feed through the block.
-
Well this line comes out of the block tied in with the oil pressure switch going to the bottom of the compressor in a #4 hose
-
Ok, you probably have Maxxforce DT,9 or 10 series.
-
Unscrew oil filter 3 or 4 turns so it’s completed unseated. Have some start up truck while you watch. Yeah it will be a mess but you will sure as hell know you have oil pressure and then you can be done with this and no for sure. How bout it @Heavyd
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2