Any ideas on removing broken ubolts galled to saddle on Pete air ride, I've tried heat they won't budge, or will I have to just replace bushing pad
How to remove broken spring eye ubolts from saddle on Pete air ridem saddle
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by bocker, May 22, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Are these the ones you are dealing with?
Attached Files:
-
-
-
Tighten the nut with a 3/4 impact til it spins. Zip gun on the top to vibrate it loose. Both at the same time if you have four hands.
Normally their loose when they come it the bay, you must have the only frozen one.....lolpushbroom and spsauerland Thank this. -
Thanks Goodysnap, they must have been broke long before I had the truck, just noticed, I've been heating and beating all day one hole now open, but can't get straight hit on inner, don't have enough air volume to properly fire 3/4 impact, may have to travel to better supply, I mean these things are like welded, been trying every thing I can think of to penetrate
Goodysnap Thanks this. -
-
Get a big enough gun on that nut and tighten it........it'll move. The vibration is what will move it.
pushbroom Thanks this. -
Attached Files:
-
-
Theres a plate that goes between the ubolt and the spring on the top side. Doesnt look like they have been on there is some time.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2