Anyone have cameras inside their trailer?

Discussion in 'Ask An Owner Operator' started by StoneSSD, Jun 28, 2019.

  1. Roberts450

    Roberts450 Road Train Member

    2,237
    3,634
    Feb 6, 2016
    0
    If you reread his post he mentioned installing 3 cams, one in front facing back, one at the rear facing forward and one at the rear facing out the doors.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. RoadRooster

    RoadRooster Road Train Member

    4,121
    6,709
    May 10, 2015
    Fort Myers, Florida
    0
    Camera in front gets blinded by the headlights of the forklift, and or dock lights.
     
    86scotty and motocross25 Thank this.
  4. Ridlingdj

    Ridlingdj Medium Load Member

    414
    562
    Dec 12, 2018
    0
    I have game cameras at my farm gates and they just don't record but a few seconds at a time but I was thinking if someone was to say something tell them that you are thinking of being a YouTube star
     
    motocross25 Thanks this.
  5. MGE Dawn

    MGE Dawn Road Train Member

    1,074
    2,261
    May 19, 2019
    Vancouver, WA
    0
    I have to second the gopro idea. Those things were designed for outdoor use to begin with (hell, there's promotional footage of the things being used by skiers and snowboarders going down the mountain, which says a lot about cold and moisture resistance), so they should survive in a reefer trailer
     
  6. StoneSSD

    StoneSSD Bobtail Member

    47
    66
    Dec 9, 2013
    Richmond VA
    0
    Thanks for the engaging conversation it's given me some things to think about.

    I'm going to go for a more permanent mounting option so a gopro is out as the SD card is in the camera. Could be done wireless but then I'd have to remove the camera to charge the battery. So it becomes a bit too cumbersome to use.

    I'm wanting surveillance. I want to know what is going on in my trailer. I want to see if the dock workers are smoking in my trailer (I've smelled smoke in my trailer after a delivery)

    I also want to have some real ammo to fire off when a receiver charges 300.00 to offload and takes 5 hrs to do it. I want to be able to question the work ethic and exorbitant fee - then post it on YouTube to show just how slothenly the lumpers really are (at certain locations).

    In a previous life I was an electrical engineer in the Navy on several different submarines - so the setup shouldn't be terribly difficult. I've been going through several electronics supply catalogs to get some ideas working. It's going to take Utility 9 days (possibly less) to repair the wall. I've got some time to put some ideas together.

    First I am looking at a specific type of camera that is rated to operate in -50 to 120 F. It needs to be nitrogen filled so it will not fog over. 1080i and if I can get them for a decent price 4k at 120 fps. I am also looking at an f1.5 - f2.0 - which means it will make an incredibly good picture.

    I can use a video multiplexer to tie the feed together into a 3 or 4 window camera view on my laptop.

    I'm still batting it around to figure out what I'd need. Want to see if anyone has a high security set up already and how it works for their purpose.
     
    D.Tibbitt Thanks this.
  7. 062

    062 Road Train Member

    5,852
    31,733
    Oct 20, 2013
    0
    I load every couple months with a guy who has a two camera system. I haven’t asked much about it.
    As far as powering the camera. You have 12v available at the trailer plug.
    Some horse trailers have a package you can add with a two camera system, but the camera may not be suitable for the temp you will be operating at.
     
    StoneSSD Thanks this.
  8. Omega1

    Omega1 Heavy Load Member

    721
    1,595
    Nov 18, 2017
    Oregon
    0
    I agree and believe it's a good idea. I'm a company driver, but have had forks tear at the walls of more than one new trailer. This post got me thinking. Might be a good idea to take a picture of the trailer condition before loading and have an app on your camera that instantly puts a date and time stamp on the photo. I have this app, but never thought about using it for this purpose. Just a thought. You could certainly prove when the damage happened.
     
  9. 86scotty

    86scotty Road Train Member

    3,933
    10,225
    Aug 27, 2017
    Appalachia
    0
    If you wanted to go to the trouble to do this then do it right. Make sure the camera you choose is tiny because if it's big enough or hangs down or off the side enough to be noticed then a dumb forklift driver will find it with his machine and tear it off for you....eventually.

    Also, get a camera with night vision (most are anyway) so you can check on your cargo while enroute. That would be the ticket. You'd know if something has shifted during transit and if you're not sealed you can deal with it. Shippers would appreciate this too if done right.
     
    StoneSSD and olddog_newtricks Thank this.
  10. Roberts450

    Roberts450 Road Train Member

    2,237
    3,634
    Feb 6, 2016
    0
    @StoneSSD that's why I posted the link to Dieselboss those cameras are made for the outside of the trucks and sound like they have built in heaters to keep them warm under 40 degrees. As soon as I get time I will be installing one of their camera systems on my truck.
     
    StoneSSD Thanks this.
  11. HillbillyDeluxeTruck

    HillbillyDeluxeTruck Road Train Member

    5,769
    29,473
    Mar 3, 2013
    San Antone
    0
    Had one in the of the dry van I used to pull for my moms husband. It was mounted up at the top in the front. Worked well for most loads and the built in infared? lighting made everything visible. The system is designed for vehicles as well.

    And I'll be ###### if I can remember the manufacturer...I'll look and see if I can find an old email from them.
     
    StoneSSD Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.