ok ok.. I thought the winch could some how slide or something and cause damage to the trailer tires.. ill remove those on Sunday.. probably going o replace the rest of my winches with ratchet ones also
Trying To Add Winches On This Flatbed..... Lost
Discussion in 'Flatbed Trucking Forum' started by Doughboy18, Jun 27, 2019.
Page 3 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Lepton1 Thanks this.
-
If its too far down to reach with a nut, use a Riv-nut on it.
-
Just drill a hole and put the bolt all the way through. The nut on the end will keep the winches from sliding off and it's removable if you want to add more.
-
The rivet is all that is necessary, because it isn't a load-bearing piece...it's only job is to prevent the winches from falling off if they aren't being used. Personally, I'd just rivet them back on...quick and easy.
-
shouldnt you be using double LL winch's on that trac.
Lepton1 Thanks this. -
-
Removed all the rivets. replaced with lager screws 5/16. bolted up nice and snug..
probably swap out all the original winches with racheting winches by next week.
might be overkill but now I have a nice 24 winchesLepton1 and HoneyBadger67 Thank this. -
99% of your load will require 12 or less straps.
I have 15 sliding winches and 5 two inch ratchet straps.
Never felt under equipped. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 5