My both steers become like this in 2 days. What could be the problem?
Im shutdown at TA to check allignment .
Please advise
Tire problem
Discussion in 'Experienced Truckers' Advice' started by Newbieboy, Sep 11, 2019.
Page 1 of 5
-
Attached Files:
Lepton1 Thanks this. -
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You are turning too short and hitting the spring, frame or something. I (just my opinion) sure would not let TA touch my alignment.
-
You guys think its not allignment issue?
-
TA is all set to put new tire but i need to find problem before putting new tires.
-
I gotta go with the wheel cut being set too sharp and contacting something on the frame or suspension.
-
If it is I wouldn’t trust T/A to work on it. Find an alignment shop if it is.
How does it handle going down the road?mp4694330 Thanks this. -
Its shakes lil bit at 70 i believe it’s normal.
-
M sure its not kingpin. It’s something else.
-
I agree also that it’s hitting something when you turn sharp. Look around and see if you have any marks, Frame, spring, and or any accessories mounted on the frame.
But I wouldn’t leave out the toe being to out either.Goodysnap, PE_T, jammer910Z and 3 others Thank this. -
I have seen a lot of wear from some serious bad tow ins or outs, but never seen it rip chunks out. I am betting there is some shiny metal there somewhere.
Lepton1, Newbieboy and Diesel Dave Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 5