Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

So I traded my 2013 VNL670

Discussion in 'Volvo Forum' started by Amram, Sep 22, 2019.

Page 3 of 5
  1. Sep 23, 2019 #21
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    My concern right now is.. where the heck do I mount my tripac on this thing? Also will my moo moo bar off the front of the 2013 fit on the 2000?
     
    Amram, Sep 23, 2019
    Amram, Sep 23, 2019
    #21
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 23, 2019 #22
    boneebone

    boneebone Road Train Member

    2,232
    2,266
    Mar 13, 2009
    0
    The TriPac might need to be mounted on the passenger side before the fuel tank underneath the sleeper or you may have to move the fuel tank forward, remove the right rear fairing and mount it on the frame rail.

    The bull guard may work if the frame rail spacing is the same as the 670.
     
    boneebone, Sep 23, 2019
    boneebone, Sep 23, 2019
    #22
  4. Sep 23, 2019 #23
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    I think the 670 is wider.
     
    Amram, Sep 23, 2019
    Amram, Sep 23, 2019
    #23
  5. Sep 23, 2019 #24
    Intothesunset

    Intothesunset Road Train Member

    2,290
    4,874
    Apr 15, 2019
    truck
    0
    There are many things that can be done for ecm tunes in those 12.7 Detroit's.
     
    Intothesunset, Sep 23, 2019
    Intothesunset, Sep 23, 2019
    #24
    KB3MMX Thanks this.
  7. Sep 23, 2019 #25
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    I have been looking at that. For now just gonna run it as is to see how she rolls.
     
    Amram, Sep 23, 2019
    Amram, Sep 23, 2019
    #25
  8. Sep 24, 2019 #26
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    So I have alot of fresh 10-30 Rottella T5 laying around. Would that be a good oil to run in the Series 60?
     
    Amram, Sep 24, 2019
    Amram, Sep 24, 2019
    #26
  9. Sep 24, 2019 #27
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    What is the operating rpm range of the series 60? Also are these older trucks supposed to ride rougher than my 2013 did?
     
    Amram, Sep 24, 2019
    Amram, Sep 24, 2019
    #27
  10. Sep 27, 2019 #28
    KB3MMX

    KB3MMX Road Train Member

    3,057
    2,574
    Dec 29, 2014
    Orrstown, PA
    0
    That'll work great on the S60.

    Nice new ride ! That's a step in the right direction and being on paper you'll get your freedom back.
    You can always put nice seats, etc etc in as you go.
     
    KB3MMX, Sep 27, 2019
    KB3MMX, Sep 27, 2019
    #28
  11. Sep 27, 2019 #29
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Thanks. It's got good bones. These OG Volvo's are built like tanks. 4 cab shocks! :eek:. Just got the truck back from the dyno.it is putting down every bit of the horsepower that's advertised on the engine label. Detroit says it has absolutely no blow by.
     
    Amram, Sep 27, 2019
    Amram, Sep 27, 2019
    #29
    86scotty, KB3MMX, bzinger and 3 others Thank this.
  12. Sep 27, 2019 #30
    OldeSkool

    OldeSkool Road Train Member

    1,257
    2,746
    Jul 17, 2018
    Arkansas
    0
    Nice truck!!!! I'm sure you'll like it.
     
    OldeSkool, Sep 27, 2019
    OldeSkool, Sep 27, 2019
    #30
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 3 of 5